A MODEL OF AN A-FRAMED CONDENSING, STEAM BEAM ENGINE, CIRCA 1850.

This auction is closed, but maybe you like the following items?

Images

A MODEL OF AN A-FRAMED CONDENSING, STEAM BEAM ENGINE, CIRCA 1850.
Highlighted by our experts
2648937. A MODEL OF AN A-FRAMED CONDENSING, STEAM BEAM ENGINE, CIRCA 1850.

Description

on tank bed, with governor, cylinder 57 x 140 (bore and stroke/mm), cast iron flywheel, 425 x 25 (diameter and width of face/mm), D-slide valve driven by single eccentric, fitted with jet condenser and air pump, plus boiler feed pump fed from hotwell, mahogany case 100.6cm x 42cm x 21cm, with a later wooden slatted base on castors, 103cm wide x 38.5cm deep x 48.5cm high

*** purchased from engineer and conservationist Jonathan Minns in the 1970s.

Condition

appears in generally good condition, functional at the time of writing, but functionality is not guaranteed.

Theme

Model Stationary Steam Engines and Antiquarian Engineering Books

Do you have something similar to sell? Get your items valued free of charge!

Bidding

Got something similar to sell?
Have your item valued free of charge.
Highlighted by our experts
2648937. A MODEL OF AN A-FRAMED CONDENSING, STEAM BEAM ENGINE, CIRCA 1850.

Description

on tank bed, with governor, cylinder 57 x 140 (bore and stroke/mm), cast iron flywheel, 425 x 25 (diameter and width of face/mm), D-slide valve driven by single eccentric, fitted with jet condenser and air pump, plus boiler feed pump fed from hotwell, mahogany case 100.6cm x 42cm x 21cm, with a later wooden slatted base on castors, 103cm wide x 38.5cm deep x 48.5cm high

*** purchased from engineer and conservationist Jonathan Minns in the 1970s.

Condition

appears in generally good condition, functional at the time of writing, but functionality is not guaranteed.

Theme

Model Stationary Steam Engines and Antiquarian Engineering Books

Do you have something similar to sell? Get your items valued free of charge!

Details

House
Rushbrooks Auctioneers
Visits: 1,065